Commercial Doors Built for Manhattan Businesses
For more than 40 years, we have installed, replaced, and repaired commercial doors for New York City businesses, builders, and contractors. We work with high-quality doors and door hardware and match existing finishes so a repair or replacement keeps the entrance consistent across your property. From a storefront that took damage to a closer that slams or a panic bar that needs replacing, we handle it as part of our full door repair and installation service. Call (212) 204-1655.
Commercial Door Services
Commercial Door Installation
Our shop crews install and replace every type of commercial door — storefront glass, hollow metal, steel security, and more — using quality doors and hardware sized to the opening and frame. Most standard installations take only a few hours, and we schedule around your business hours to keep disruption to a minimum. For the hardware side of the job, our commercial locksmith team handles locks, cylinders, and access devices in the same visit.
Repair & Door Closers
Dragging, misaligned, or slamming doors usually trace to the frame, hinges, or closer — we diagnose the frame, hinges, alignment, and closer rather than just swapping parts. We repair commercial door closers so doors shut gently and seal properly, and we service glass doors and their pivots, patch fittings, and rails. For after-hours break-in damage we also offer 24/7 emergency response across the five boroughs.
Door Types We Service
Our crews work on storefront doors, fire-rated doors, automatic doors, and revolving doors throughout NYC. Tell us the door type and the problem, and we’ll bring the right hardware to repair what you have or recommend a replacement that fits the entrance and the traffic it sees.
Panic Bar Installation
Exit doors are where fire code gets enforced. Golden Key installs panic bars — push bars, crash bars, and full exit devices — on storefronts, offices, warehouses, and assembly spaces across New York City, fitted precisely to the door so the latch releases in one push even under crowd pressure. Much of our panic bar installation work is compliance-driven: warehouse and venue operators call us ahead of an FDNY inspection, and we can outfit several exit doors in a single visit so the whole egress path passes.
The code requirements are specific: an exit door has to open in a single motion, without a key or special knowledge, with the bar set at the mounting height the code calls for — and a fire-rated door needs a fire-rated exit device to match. We fit rim, mortise, and vertical-rod hardware to suit the door, and we repair what’s already installed: sticking latches, bars that have lost their spring, failed alarm units, and doors that no longer latch behind the bar.
Because these are working entrances, not just emergency exits, we also handle what surrounds the bar — outside trim with a keyed cylinder where you want re-entry, and electric strikes or access-control tie-ins so staff can badge in from outside while the exit stays free-swinging from inside. Not sure your exits would pass an inspection? We’ll walk the doors with you, flag anything an inspector would, and put an estimate in your hands before we leave — at no charge. Call (212) 204-1655.
Commercial Door Repair, Problem by Problem
Commercial doors rarely fail all at once. A hinge wears, the door drops a little, the latch starts missing the strike, and the closer works harder until something gives. These are the failures we see most on commercial door repair calls in NYC, and how we handle each.
Hinges and Hinge Replacement
The top hinge carries most of the door’s weight, so it usually goes first. Warning signs: the door drops toward the latch side, the gap widens at the top hinge corner, screws back out, or the door knocks or squeals.
- Loose or stripped screws. In a hollow metal frame we re-tap the steel reinforcement or step up a screw size; on wood doors we through-bolt.
- Worn butt hinges. We replace them with heavy-weight, ball-bearing hinges sized to the door’s weight and traffic. A standard door up to 90 inches tall needs three hinges, plus one for every additional 30 inches.
- Repeat failures on a busy door. A continuous hinge runs the full height of the door and spreads the load along the whole edge. It is a common fix for storefront and hollow metal entrances that keep tearing out butt hinges.
- Outswinging exterior doors. These need non-removable pins or security studs so nobody can pull the pins from outside.
- Fire-rated doors. Replacement hinges must match what the door’s label calls for in type, material, and number, or the rating is compromised. See our fire-rated door service.
Sagging, Dragging, and Doors That Won’t Latch
We start by reading the gap. A commercial door should sit in its frame with an even margin, roughly an eighth of an inch, along the hinge side, the top, and the latch side. Where that gap closes up tells us whether the cause is worn hinges, a frame that has gone out of square, or a floor or threshold that has shifted.
The fix may be shimming the hinges, moving the strike, resetting the closer arm, or correcting the frame. A new lock on a door that hangs crooked will bind again within weeks.
Closers, Frames, and Thresholds
- Closers. A closer that slams or stops short can usually be adjusted. Separate valves control closing speed, latching speed, and backcheck, which cushions the door when someone throws it open. Oil on the closer body or the floor means the seals have failed, and that closer gets replaced. More on closer types on our automatic doors page.
- Frames. Hand trucks dent the jambs, pry attempts bend the strike area, and steel frames rust at the base where salt and mop water sit. A bent frame throws off both hinges and latch; depending on the damage, it is repaired or replaced.
- Thresholds. A loose or worn saddle becomes a trip hazard and a drag point. Accessibility rules limit threshold height to half an inch, with beveled edges. We re-anchor or replace the threshold and set the door bottom so it clears and still seals, alongside door weatherstripping where the seal is gone.
Hollow Metal Doors
Steel hollow metal doors hang in stairwells, rear entrances, basements, and utility rooms. They fail in predictable places: the bottom edge rusts from the inside, the skin separates from the internal stiffeners, prying chews up the lock edge, and closer or hinge reinforcement strips out.
Small damage can be repaired. Once the bottom has rusted through or the door has twisted, a new door in the existing frame is usually the cleaner answer, because hollow metal doors are made to match the frame’s hinge locations and lock preparation.
How a Commercial Repair Visit Works
- Tell us the door type, what it is doing, whether it is fire-rated or an exit, and when the building is open. Photos help us bring the right parts.
- The technician watches the door cycle and checks hinges, gaps, closer, latch, threshold, and frame together, then explains the cause before work starts.
- Standard hardware is fixed on the spot. When a part is made to order, such as a hollow metal door or a continuous hinge, we leave the door working and lockable and come back around your business hours.
Repair or Replace
Repair makes sense when the door slab is sound, the frame is square and solid, and the problem is in the hardware. Replacement makes sense when:
- The bottom has rusted through, the skin has separated, or the door is warped and won’t seal.
- The frame is bent or rusted out at the base.
- The door is too light for the traffic it sees.
- A fire door’s label is missing or the door has been altered beyond what the label allows, so an inspector can’t verify it.
Often there is a middle path: a new door in a good frame, or a good door upgraded with a continuous hinge and heavier closer.
Recent Commercial Door Work in NYC
Revolving doors, storefront entrances, and heavy commercial hardware — recent door projects for NYC businesses.



Trusted Since 1984
Golden Key Locksmith NYC is licensed, bonded, and insured, with more than 40 years of locksmith, door, and security service experience across New York City. Our mobile emergency service is available 24/7.
- 40+ years of NYC service
- Licensed, bonded, and insured
- Residential and commercial support
- 24/7 emergency service available
- Showroom at 328 Columbus Ave
Related Services
Service Areas
Frequently Asked Questions
Unlock our most frequently asked questions from our New York City commercial door clients.
What types of commercial doors do you install and repair in NYC?
We install and repair all types of commercial doors throughout New York City, including storefront glass doors, steel security doors, fire-rated doors, revolving doors, automatic sliding doors, and hollow metal doors. We work with all major brands and can match existing hardware to keep the look consistent across your property.
How long does a commercial door installation take?
Most standard commercial door installations are completed in about 2–4 hours, depending on the door type, the condition of the frame, and hardware complexity. Fire-rated door installations can take longer because of compliance verification. We work around your business hours to minimize disruption and clean up completely before we leave.
Do you handle emergency commercial door repairs?
Yes — we provide 24/7 emergency commercial door repair across all five boroughs. Whether a storefront door was damaged in a break-in, a hinge failed, or a closer is malfunctioning, we respond fast to secure your property. Call (212) 204-1655 any time and a technician is dispatched right away.
Can you repair commercial door closers and glass doors?
Yes. Door closer repair and glass door service are core parts of what we do — we adjust or replace closers so doors shut gently without slamming, and we service glass door pivots, patch fittings, and rails. We can also install panic bars and exit hardware on the same call.
Need Commercial Door Service in NYC?
Call Golden Key Locksmith NYC to install, replace, or repair a commercial door, or request a quote for scheduled work around your business hours.
The Perfect Solution For All Locksmith & Door Services
The team at Golden Key Locksmith NYC is always on the go. We have a fleet of mobile locksmiths that are ready to service you when and where you need it. Whether you`re locked out, need a new lock or want your security system upgraded, we can help! Give us a call today for all your locksmith needs.
- 40 YEARS EXPERIENCE
- CLIENT SATISFACTION GUARANTEED
Request a Quote
Tell us what you need — name, number, ZIP, and a few details — and Golden Key Locksmith NYC will get right back to you.
- 328 Columbus Ave New York, NY 10023
-
Mon - Fri : 8:30 AM - 5:00 PM (Showroom Hours).
Emergency Service : 24/7 - (212) 204-1655
We Are Trusted Over 40 Years
When New Yorkers need locksmith and door services they can trust, they turn to Golden Key Locksmith NYC — serving the city since 1984.